0

Your Cart is Empty

Nano & Beginner Drone Basics

I thought I would put this out to the community to see if this helps. If you are considering buying a nano drone or a beginner drones, please understand that for the most part, these are very low quality drones that will crash and break within the first few minutes of flying.  But if you are a drone enthusiast like me, don't give up. Here are some tips below to help you learn how to use your new drone.

How to Charge Your Drone?

  • Use the provided USB charging cable to charge your quadcopter from a computer or wall outlet with 12v adapter (Not Included). Never leave your charging quadcopter unattended or plugged in for longer than necessary. All lithium ion batteries can be dangerous if they over charge, which may lead to a risk of fire. The charging is complete when the LED light in the charging cable goes on or off depending on the drone model.

How to Fly Your Drone for the First Time - First Flight?

  • Power on the quadcopter on a flat and level surface so that the gyro becomes properly set.
  • Power on the transmitter (always ensure the left-hand stick is all the way at the bottom first)
  • Now that both the quad and transmitter are powered on, move the left-hand control stick all the way up for about 2 seconds, and then all the way down. You should hear a series of beeps while doing so. When complete, all four lights on the quad should be solid and not blinking. If still blinking, repeat the steps.Your quadcopter is now armed and ready to fly!

How to Control a Drone -  Flying Basics?

  • The right-hand control stick moves the quadcopter forward, backward, left and right.
  • The left-hand control stick on the transmitter controls the throttle (up/down) as well as the yaw, which controls the rotation (spin left or right) of the quadcopter.
  • These movements of the quad will always be from the perspective of the quad, no matter which way it is facing or has rotated.
  • When learning to fly, try not to turn spin (yaw) the quad so that the front is always facing the same direction.
  • As the quad moves around, turn your body so that you are always facing the same direction that the quad is facing. This helps to keep track of which direction is forward, backward, etc
  • The throttle is very sensitive, try using a very soft touch while learning how to fly. If you lose control, you can always power down the quad by lowering the throttle all the way down, this will shut off the motors immediately. Under normal circumstances, it is usually better to cut the throttle and crash than to have the quadcopter fly away!

How to Change The Drone Propellers?

  • All quadcopters have two motors that spin clockwise and two that spin counterclockwise. If a propeller meant for counterclockwise direction is placed on a clockwise spinning motor, there will be no lift generated.
  • Each propeller is marked on its underside with either an A1, A2, B1 or B2 or some other form of marking. The numbers are not important, however the letters are. These letters correspond to the direction in which the propeller is designed to spin.
  • When changing a propeller, always be sure to replace it with another propeller with the same letter.

How to Re-calibrate Your Drone?

There are three ways to correct for calibration issues if your drone is flying off to one side or not flying properly:
  • Automatically recalibrate - Power off the quad, place it on a flat and level surface and then power it back on. Wait at least 3 seconds before attempting flight. The quadcopter should now be re-calibrated.
  • Manually recalibrate – While the quad is turned on, place it on a flat and level surface. Push the left-hand control stick all the way to the bottom left corner and the right-hand control stick to the upper left corner and hold both sticks in those positions. The lights on the quadcopter should begin blinking quickly. Hold the sticks in that position for at least 4 seconds. The quadcopter should now be re-calibrated.
  • The paper trick – With the quad copter off and on a flat and level surface, place a couple pieces of paper under the feet of the quadcopter in the direction that it tends to fly in. This will slightly lift one part of the quadcopter higher than the other side. Now power it on and let it automatically recalibrate. You can play with how many sheets of paper you use until the problem is solved.

How to Use Trim Controls:

  • There are two sets of directional arrow buttons on the transmitter. Each arrow is a trim control to counteract the quads movement either forward, backward, left or right.
  • If the quadcopter is drifting to the left, push the directional arrow pointing to the right. This will tell the quadcopter to adjust itself more to the right in order to compensate for the drifting to the left. It is recommended that you only use one click at a time in to not overcompensate in any one direction.
  • With correct trimming, you should be able to get the quadcopter to hover fairly steadily.

How to Troubleshoot Your Drone:

Problem: One of the motors seems to be completely dead or is very hard to spin.
Solutions: Remove the propeller from the problem motor and put it back on, making sure that it is not pressed down too hard. Props which are pushed in too tight can jam the motor
Problem: The quadcopter will not lift off or shoots off to one direction without leaving the ground.
Solution: This typically means that one or more of the props are not installed correctly Please reference your included instructions for proper propeller placement.
Problem: One of the motors seems to stall when tilted slightly.
Solution: This may not mean there is anything wrong with the quadcopter. It has built-in gyroscopes that change power to the motors in order to maintain stability. If this does appear to be a problem, going through the manual recalibration will fix most issues related to this.
Problem: The quadcopter flies off in a certain direction all by itself.
Solutions: (1)This typically means that the quadcopter is not calibrated. Please see the recalibration information above. (2) You may need to use the trim controls to counteract the drift. Please see the section above regarding trim controls.
Problem: The quadcopter will not take off and only skims along the floor.
Solution: This typically means that one or more of the propellers is on incorrectly. Please reference your manual for changing the propellers.
News & Updates

Sign up to get the latest on sales, new releases and more …